| Author |
|
Black Beauty
Senior Alfisti
Rnr-up helpful member 06, Pin 07’08
Joined: 25 June 2005
Location: Ireland
Online Status: Offline
Posts: 20149
|
| Posted: 20 September 2008 at 11:40 | IP Logged
|
|
|
Using KWP7.1
{ address 0x20 + Auto }
with a modified KKL interface [ wire from pin 7 connected to pin 1 ]
these are the Error codes for the ABS control unit Bosch "ABS 5.3" and "ABS 2E":
12-diagnosis - Start / End (Starts / Ends with the diagnosis)
16-valve defect magnetic front LH /
17-valve defect magnetic front RH /
18-magnetic valve defect behind
19-defective safety valve relay
25-False Übetragungstaktung-gear wheel defektr
26-magnetic valve defect behind LH
27-magnetic valve defect behind RH
28-defect discharge valve Magne front RH
29-defect discharge valve Magne front LH
31-defect discharge valve Magne rear LH
32-defect discharge valve Magne rear RH
35-pump defects Rückforderpumpe Relaikreis
37-Broken Bremslichtschalter
39-Broken Vordersensor LH
41-Vordersensor not connected LH
42-Broken Vordersensor RH
43-Vordersensor not connected RH
44-Broken rear sensor LH
45-Behind sensor is not connected LH
46-Broken rear sensor RH
47-back sensor is not connected RH
48-battery voltage is not okay
55-defect control unit
56-reading with "ausblinken" failed
74-lot impact on warning in the instrument block
Edited by Black Beauty on 02 February 2009 at 15:48
|
| Back to Top |
|
| |
Black Beauty
Senior Alfisti
Rnr-up helpful member 06, Pin 07’08
Joined: 25 June 2005
Location: Ireland
Online Status: Offline
Posts: 20149
|
| Posted: 24 September 2008 at 20:14 | IP Logged
|
|
|
Called to see a mate today as his car had an airbag light on, so I checked his ABS system too, using KWP7.1.
No Errors found.
|
| Back to Top |
|
| |
Black Beauty
Senior Alfisti
Rnr-up helpful member 06, Pin 07’08
Joined: 25 June 2005
Location: Ireland
Online Status: Offline
Posts: 20149
|
| Posted: 02 February 2009 at 15:52 | IP Logged
|
|
|
pictures updated.:)
|
| Back to Top |
|
| |
adrianjgsmith
Junior Alfisti
Joined: 26 February 2009
Location: United Kingdom
Online Status: Offline
Posts: 1
|
| Posted: 26 February 2009 at 16:41 | IP Logged
|
|
|
Hi,
I've come up with an ABS warning in my dash. Hooked it up to Unidiag, and it looks like I have an error 11 (which isn't in your list). Does that make any sense to you?
Unidiag screengrab for my error:
http://farm4.static.flickr.com/3136/3294551157_9348f62f42_o. jpg
Cheers,
Adrian
|
| Back to Top |
|
| |
Black Beauty
Senior Alfisti
Rnr-up helpful member 06, Pin 07’08
Joined: 25 June 2005
Location: Ireland
Online Status: Offline
Posts: 20149
|
| Posted: 26 February 2009 at 16:56 | IP Logged
|
|
|
sorry, no picture at that link
|
| Back to Top |
|
| |
Black Beauty
Senior Alfisti
Rnr-up helpful member 06, Pin 07’08
Joined: 25 June 2005
Location: Ireland
Online Status: Offline
Posts: 20149
|
| Posted: 26 February 2009 at 17:11 | IP Logged
|
|
|
error is 0B [ hex ] not 11 [ decimal ]
|
| Back to Top |
|
| |
t-spark
Junior Alfisti
Joined: 06 January 2009
Location: Lithuania
Online Status: Offline
Posts: 3
|
| Posted: 07 April 2009 at 08:39 | IP Logged
|
|
|
I have this error: DTC:0x0A = 10.
Which error is it according your list above? 0A in hex is equal 10 in decimal.
|
| Back to Top |
|
| |
Active Topics 
Memberlist 
Search 
Help
Register 
Login
Alfa Romeo forum : Technical (156)
Topic: ABS ECU Error listings
