| Author |
|
Black Beauty
Senior Alfisti
Rnr-up helpful member 06, Pin 07’08
Joined: 25 June 2005
Location: Ireland
Online Status: Offline
Posts: 20149
|
| Posted: 28 December 2008 at 10:38 | IP Logged
|
|
|
To gain access to the diagnostic port 1st remove this panel:
This is what the connector looks like:
To jumper pin 7 [ engine ecu ] to pin 3 [ airbag ] or pin 1 [ abs ] you need to remove this conenctor:
Using a paper-clip or 'earth' wire bridge out from 7 to 1 for ABS:
Using a paper-clip or 'earth' wire bridge out from 7 to 3 for Airbag:
Re-insert the connector & plug in a Standard KKL interface:)
Edited by Black Beauty on 15 January 2009 at 16:35
|
| Back to Top |
|
| |
t-spark
Junior Alfisti
Joined: 06 January 2009
Location: Lithuania
Online Status: Offline
Posts: 3
|
| Posted: 06 January 2009 at 09:25 | IP Logged
|
|
|
Could you please update the pictures?
|
| Back to Top |
|
| |
Nigel S
Veloce
Voted best thread 2006 (Toast)
Joined: 12 November 2004
Location: United Kingdom
Online Status: Offline
Posts: 5612
|
| Posted: 06 January 2009 at 14:27 | IP Logged
|
|
|
Has he chucked his potatoes out of his pram again? 
__________________
Timbaland knows the way to reach the top of the charts.
Maybe if I work with him I can perfect the art.
|
| Back to Top |
|
| |
alpha-ts
Junior Alfisti
Joined: 06 January 2009
Online Status: Offline
Posts: 12
|
| Posted: 06 January 2009 at 21:37 | IP Logged
|
|
|
Its a shame really.
|
| Back to Top |
|
| |
slickdeville
Junior Alfisti
Joined: 13 September 2005
Location: Ireland
Online Status: Offline
Posts: 1588
|
| Posted: 06 January 2009 at 22:09 | IP Logged
|
|
|
Learned alot from BB's write ups.............shame he's not around anymore
__________________
|
| Back to Top |
|
| |
michaeld
Senior Alfisti
Pin 07’08
Joined: 22 September 2004
Location: United Kingdom
Online Status: Offline
Posts: 11781
|
| Posted: 06 January 2009 at 22:20 | IP Logged
|
|
|
He was a bit of a useless being anyway
__________________
Norn Iron
Dublin 2008 Meet Organiser
Booze Deals Tipster
|
| Back to Top |
|
| |
bannowhog
Junior Alfisti
Pin 08
Joined: 26 June 2008
Location: Ireland
Online Status: Offline
Posts: 478
|
| Posted: 06 January 2009 at 22:33 | IP Logged
|
|
|
michaeld wrote:
He was a bit of a useless being anyway
|
|
|
__________________
BURIED CITY CUSTOMS
MOTORCYCLE ENGINEERING
|
| Back to Top |
|
| |
Niko
Junior Alfisti
Joined: 30 November 2005
Location: Croatia
Online Status: Offline
Posts: 314
|
| Posted: 07 January 2009 at 08:41 | IP Logged
|
|
|
slickdeville wrote:
| Learned alot from BB's write ups.............shame he's not around anymore |
|
|
What happened to him....why isn't he around any more? 
__________________
156 Autodelta
|
| Back to Top |
|
| |
Black Beauty
Senior Alfisti
Rnr-up helpful member 06, Pin 07’08
Joined: 25 June 2005
Location: Ireland
Online Status: Offline
Posts: 20149
|
| Posted: 15 January 2009 at 16:36 | IP Logged
|
|
|
Normal service is being resumed
|
| Back to Top |
|
| |
Alfa-BR
Junior Alfisti
Joined: 25 September 2004
Location: Brazil
Online Status: Offline
Posts: 2277
|
| Posted: 15 January 2009 at 16:47 | IP Logged
|
|
|
My only comment:
To remove the panel (first pic) loose the steering wheel lever first and then pull the panel from the botton first. Your pic suggest the opposite, but I know you didn't mean it. 
Re-install it backwards.
Doing this will avoid damage to the panel clips and keep it always secure in place.
__________________
156 2.0 TS 1999 remapped by AT & 145 TS 2.0 1996 remapped by PC
|
| Back to Top |
|
| |
overcharged
Junior Alfisti
Joined: 17 December 2008
Location: New Zealand
Online Status: Offline
Posts: 85
|
| Posted: 16 January 2009 at 08:56 | IP Logged
|
|
|
Can both bridges be left in place??-I have been considering moving the diag plug and converting it to a USB in below the ashtray
__________________
|
| Back to Top |
|
| |
Black Beauty
Senior Alfisti
Rnr-up helpful member 06, Pin 07’08
Joined: 25 June 2005
Location: Ireland
Online Status: Offline
Posts: 20149
|
| Posted: 16 January 2009 at 11:00 | IP Logged
|
|
|
not that i now of as the Airbag & ABS use the same baud rates, different addressing though.
|
| Back to Top |
|
| |
Active Topics 
Memberlist 
Search 
Help
Register 
Login
Alfa Romeo forum : Technical (156)
Topic: Diagnostic Port + ABS/Airbag ’bridges’
